Version 5.1
Features, changes and bug fixes introduced in version 5.1.0.79
These features and fixes build on the previous 5.0 releases.
Features
enviro TOC
-
From now on the enviro TOC contains FLEXDILUTION as standard. FLEXDILUTION comprises of two different approaches to automatically process highly loaded liquid samples:
-
Automated dilution of the original sample with water
This is a completely new feature and only available for enviro TOC in combination with 60 position autosamplers.
-
Automated calculation of a suitable injection volume
This function is similar to the automatic calculation of the injection volume as realized in the vario TOC cube with the precise methods.
-
-
Units are now visible in the column description of the task list.
-
Methods have been improved (especially Particle methods).
-
CLD can be switched off in sleep mode. For longer sleep phases it can make sense to switch the CLD off especially to save especially the pump. In case of short sleeping phases (e.g., several hours) the CLD should not be switched off because after the wake-up, 15 minutes warm-up time of therefor the CLD need to be considered.
-
Sleep/Wake-up functionalities have been improved.
-
New BCB Version included for additional CLD errors and commands.
-
Method editing:
-
added tabs for flows, search / filter box, button on flow editor to copy the whole flow and open it
-
added background grid and snap-to-grid functionality to flow designer
-
-
Make TN available for solids.
-
Highlight default calibration in calibration selection.
-
Add a button on Flow Editor to copy the whole flow and open it.
-
Cutting of the carrier gas on disconnect + turning on on connect.
-
Filtered enviro TOC methods out in the task list method column.
Bugfixes
-
Several fixes regarding software crashes
-
Fix several method issues regarding freezing software
-
Report did not include task list
-
lyticOS freeze by adding an empty line in task list